SEAL & SPRAY is a universal re-paintable sealer/protector of surfaces for various industries. Also used as anti corrosion and stone chips spray with sound-proofing properties on the basis of synthetic and polymer resins. After evaporation of the solvents remains a film with good protection against various impacts and varying climatic influences, flying gravel etc. Easy to sand after drying.
Spray an even layer about 30 cm from the surface to be treated. Recommended drying: IR or oven drying. Hold the aerosol minimum 30 cm from the surface and spray in
short even strokes. It is recommend to spray a first light coat. Apply a second heavier coat after drying. Apply 2 coats for the best result. Thick layers, not fully cured can cause little pinholes in the surface which can cause problems with coverage of the paint.