POWERBOND is a two-component methacrylate adhesive, which is intended for very strong and structural bonding. In addition, the product offers excellent chemical resistance for permanent bonding, even in harsh environments. After complete curing, Powerbond has excellent impact, peel and pressure resistance

Powerbond is suitable for bonding a wide variety of composite materials, plastics and metals, steel and aluminum. These materials can be glued without surface preparation

The optimum processing temperature is between 18 °C and 25 °C. A higher or lower temperature will affect the processing time of the Powerbond. Before each use, make sure that the mixer to be used is properly attached to the Powerbond and that the Powerbond is properly placed in the application gun. Furthermore, it must be ensured that the surfaces to be bonded are not contaminated with oils, dust, paint, oxidation layers and other impurities. Before gluing, a small amount of glue must be squeezed out to ensure that the two components are completely mixed, otherwise the adhesive properties will decrease. The subsequent joining of the materials to be glued must take place within the processing time. At the end of the processing time, there should be no strong mechanical stress on the adhesive until it has fully cured, otherwise the adhesive properties will be affected

• msds-7045-power-bond-a-white-400-ml-en.pdf
• msds-7045-power-bond-a-white-400-ml-du.pdf
• msds-7045-power-bond-a-white-400-ml-fr.pdf
• msds-7045-power-bond-a-white-400-ml-it.pdf
• msds-7045-power-bond-a-white-400-ml-nl.pdf
• msds-7045-power-bond-b-white-400-ml-du.pdf
• msds-7045-power-bond-b-white-400-ml-en.pdf
• msds-7045-power-bond-b-white-400-ml-fr.pdf
• msds-7045-power-bond-b-white-400-ml-it.pdf
• msds-7045-power-bond-b-white-400-ml-nl.pdf
• tds-7045-powerbond-400-ml-de.pdf
• tds-7045-powerbond-400-ml-en.pdf
• tds-7045-powerbond-400-ml-fr.pdf
• tds-7045-powerbond-400-ml-it.pdf
• tds-7045-powerbond-400-ml-nl.pdf