✔︎ Minimum drying time of 2 hours
✔︎ On polyurethane base
✔︎ Durable adhesion
PANELBONDING SPECIAL PRIMER is a liquid polyurethane-based primer for improving the adhesion of Klebe Dicht KD 385 on Eternit Eter-Color panels.
Pre-treatment of the facade panel with Eternit Eter-Color, is essential to obtain a durable adhesion.
The surface must be clean, solid, dry, dust and grease free.
Keep the container tightly closed until the moment of processing.
Do not process the Primer from the container.
Pour as much Primer in a clean paint tray as can be used within 30 minutes.
Do not longer use the primer remains.
Immediately close the container.
Avoid contact of the cleaned and primed surfaces as this adhesion may interfere. Condensation may also affect the adhesion.
Do not apply the primer at very high humidity such as in dense fog and also not with precipitation/rain threat.
The primer should be applied with a clean short-haired roller.
Provide the adhesion surface primer such that the primer forms a continuous layer or film.
The applied primer layer is visible. If this is distracting, it is necessary to use masking tape to prevent that the primer on the bonding surfaces comes on the visible side.