FILL PRIMER
- Quick drying
- Very high coverage and filling power
- Good corrosion protection
- Easy to sand, both wet and dry (from sanding grit 400)
- Respray able with almost all paint systems (test!)
FILL PRIMER is a high quality, fast drying primer for pre-treating treated and untreated surfaces.
Suitable Nozzle's
| Art. Nr.: | Product : | VPE : | Picture : |
|---|---|---|---|
| 0039 | WIDE JET ( XL ) | 12 |
 |
| 0038 | WIDE JET ( M ) | 12 |
 |
| 0001 | WIDE JET ( S ) | 12 |
 |
| 0002 | JECT ROUND | 12 |
 |
Pre-treatment of treated and untreated substrates::
-
Wood
-
Metal
-
Aluminium
-
Glass
-
Stone
-
Eternit
-
Pottery
Suitable primer as pre-treatment before coating with alkyd resin, nitro-cellulose, 1-K acrylate and 2-component acrylic lacquers.
Pre-treatment:
-
The surface must be clean, dry and free of grease.
-
Remove loose old paint and rust, sand the surface.
Treatment:
-
The surface must be clean, dry and free of grease.
-
Bring the aerosol to room temperature.
-
Ideal processing temperature is 15 to 25 °C.
-
Before use shake the aerosol well for 2 minutes, and spray a sample.
-
Spray distance to the surface to be treated approx. 25 to 30 centimetres.
-
Spray the primer in several thin layers.
-
Shake the aerosol again before every layer or use.
-
After use, clean the nozzle, (turn the aerosol upside down and spray for 5 seconds).
-
The drying time depends on the ambient temperature and humidity and the layer thickness.
