✔︎ Long-term protection
✔︎ Strong adhesion to the substrate
✔︎ Ready to use
ROST STOP gives a long-term protection of metals against corrosion. Rost Stop compounds with Iron oxides and converts it into a protective layer. Rost Stop forms a homogeneous surface with a strong adhesion to the substrate. Rost Stop needs to be applied in two layers.
The second layer is paintable after a curing time of 12-24 hours.
Rost Stop is often used for:
Car restoration companies, Shipbuilding, Construction Works, Agricultural mechanization and such.
Rost Stop may even be applied to surfaces that are still moist! In a warm and dry environment Rust Stop will harden quickly and can be provided with a final coat; paint or underbody protection.
Rost Stop is ready to use, shake well before use.
Remove loose rust and paint by means of a steel wire brush and treating with a first layer Rost Stop RS .
After about two hours, applicate a second layer.
Curing time for recoating is 12-24 hours.
Tools, brushes and spray equipment must be cleaned with soap and water before Rost Stop is cured.