DUAL TIN SOLDER SLEEVES - Pro Part
Nederlands    Deutsch    English    Français    Italiano
Back
6855 t/m 6858

DUAL TIN SOLDER SLEEVES

Waterproof connections

- Transparent insulation

- Temperature resistant from -60 ° C to 130 ° C

DUAL TIN SOLDER SLEEVES have been developed for electrical connections in applications where there should be no problems with quality, reliability, service life and water tightness.

DUAL TIN SOLDER SLEEVES have been developed for electrical connections in applications where there should be no problems with quality, reliability, service life and water tightness.

Dual Tin Solder Sleeves are very easy to use, because the sleeves are transparent, it is easy to check the quality of the connection, and no special tools are required for installation. The solder sleeves can be used on both braided (flexible) and solid (rigid) cables. This applies to both copper and tin-plated versions, if not combined.

A heat source is required to use the Dual Tin Solder Sleeves. To do this, use a lighter, heat air blower, etc. Slide the conductors into the solder sleeves and press the solder rings flat to hold the sleeve in place. The Dual Tin Solder Sleeves heat at the level of the solder rings until they flow evenly and then heat the ends so that the colored rings insulate and seal perfectly. Then let the sleeve cool down without moving.

Article number:
Color:
Packing unit:
Measurements:
EAN code:
6855
Transparent
50
0,5 mm
8719214116675
6856
Red
100
1,5 mm
8719214116682
6857
Blue
50
2,5 mm
8719214116699
6858
Yellow
50
6 mm
8719214116705
Article number:
6855
Color:
Transparent
Packing unit:
50
Measurements:
0,5 mm
EAN code:
8719214116675
Article number:
6856
Color:
Red
Packing unit:
100
Measurements:
1,5 mm
EAN code:
8719214116682
Article number:
6857
Color:
Blue
Packing unit:
50
Measurements:
2,5 mm
EAN code:
8719214116699
Article number:
6858
Color:
Yellow
Packing unit:
50
Measurements:
6 mm
EAN code:
8719214116705