ONE STEP SAND - Pro Part
Nederlands    Deutsch    English    Français    Italiano

ONE STEP SAND

 

 Easy to use

-  Removes scratches

-  Silicone free

ONE STEP SAND is a very effective product for levelling lacquers. One Step Sand is able to remove traces of P1500 sandpaper in one step and to provide a super smooth surface. One Step Sand is made of high quality minerals that have been optimized and ensure that the polish will not stick more and stick to intensive processing. One Step Sand provides an enormous saving in time by the one step process, and can be used for all types of paint, in particular scratch-resistant coating systems.  Surfaces can be protected with intensive Politur One Step Finish.

One Step Sand is ideal for polishing of weathered or scratched paints. To be used before or after the surface has been sprayed. Also suitable for the removal of spray mist and the rectification of paint defects. Can also be used for plastic and Plexiglas.
Is not suitable for scratch-resistant coatings – using intensive Politur Pro Part is recommended for this!

Painted surfaces must be dry, cool, clean and free of dust. Do not apply in the sun. Using a polishing machine with electronic control and a polyurethane top with electronic control and a polyurethane top with Velcro function to work with. Use about half a teaspoon of One Step Sand and spread it over the surface to be cleaned.  Start with a low speed (level 1-2) so that the One Step Sand can be spread. Gradually increase the speed until the pressure decreases to level 4-5. Remove the remaining light film with a rag and check if the desired result was achieved otherwise the procedure is repeated. Surface must be well polished in order to create a gloss, only then may attach a lacquer sealer (One Step Finish). For professional use only!

Codice Articolo:
Colore:
Unita' di vendita/PZ:
Contenuto:
EAN:
4220
12
500 ml
8719214112103
Codice Articolo:
4220
Colore:
Unita' di vendita/PZ:
12
Contenuto:
500 ml
EAN:
8719214112103