COLD ZINC - Pro Part
Nederlands    Deutsch    English    Français    Italiano

COLD ZINC

 

- Weld able, even with CO2
- Sanding after complete drying
- Strong corrosion protection on metal surfaces
- To recoat / paintable with almost all modern paint systems

COLD ZINC is a special anticorrosion coating based on zinc phosphate. The product can be used both before and after the welding. Zinc Primer provides a protective layer that subsequently perfectly can be welded with CO2 and can be spot welded. During welding, it will not splash and only burn minimal. This in turn also keeps a very high protection. The addition of epoxy product creates a unique coating after curing and can perfectly serve as a primer for almost all sealants and paint systems.

 

Suitable Nozzle's

Art. Nr.: Product : VPE : Picture :
0002 JECT ROUND  12 0002

 

For the treatment of galvanized steel and untreated.

  • The surface must be clean, dry and free of grease.
  • Remove loose old paint and rust, sand the surface.
  • Processing temperature 15 to 25 °C. 
  • Before use shake the aerosol well and spray a sample.
  • Distance to the surface to be treated needs to be approximately 25 to 30 centimetres.
  • Spray in several thin layers.
  • Before applying the next layer,  shake the aerosol again.
  • After drying may, if desired, a coating be applied. 
  • After use, clean the valve (turn aerosol head and nozzle for approximately 5 seconds).
  • The drying time depends on the ambient temperature, humidity and film thickness.
Codice Articolo:
Colore:
Unita' di vendita/PZ:
Contenuto:
EAN:
5275
12
500 ml
-
Codice Articolo:
5275
Colore:
Unita' di vendita/PZ:
12
Contenuto:
500 ml
EAN:
-